part number: LUR11D14V t-1 (3mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4836 v2 checked : b.l .liu p.1/4 www.sunled.com features z low power consumption. z popular t-1 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z 14v internal resistor. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. part number emitting color emitting material lens-color luminous intensity (v=14v) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUR11D14V red gaasp/gap red diffused 8 19 627 40 absolute maximum ratings (t a =25c ) ur (gaasp/ gap) unit reverse voltage v r 5 v forward voltage v f 16 v power dissipation p t 160 mw operating temperature t a -40 ~ +70 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base 260c for 5 seconds operating characteristics (t a =25c ) ur (gaasp/ gap) unit forward current (typ.) (vf=14v) i f 10.5 ma forward current (max.) (vf=14v) i f 13.5 ma reverse current (max.) (v r =14v) i r 10 ua wavelength of peak emis- sion (typ.) (vf=14v) p 627 nm spectral line full w idth at half-maximum (typ.) (vf=14v) d 625 nm spectral line half-width (vf=14v) (typ.) ? 45 nm
part number: LUR11D14V t-1 (3mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4836 v2 checked : b.l .liu p.2/4 www.sunled.com ? ur
part number: LUR11D14V t-1 (3mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4836 v2 checked : b.l .liu p.3/4 www.sunled.com remarks: if special sorting is required (e.g. binning based on , luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% note: accuracy may depend on the sorting parameters.
part number: LUR11D14V t-1 (3mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4836 v2 checked : b.l .liu p.4/4 www.sunled.com packing & label specifications LUR11D14V
|
